• Linked Applications

Karbonic-X Carbon Fiber QuadCopter Air Frame

Introducing the Karbonic-X 318mm Quad/X8 Carbon Fiber Multicopter High Performance Air Frame.

Designed by our In-House Designer DC-Concepts and Manufactured By AddictiveRC, LLC

I am the Owner Of AddictiveRC. 

the Following is a Custom Build of a  Karbonic-X with Copter Control being used as the Flight Controller for Out Frame Kit.

The Karbonic-X is For Sale on our RcHobbyHelicopter.com Website.


Karbonic-X Frame Specs:


7 to 8 inch Props

14-22mm Motor mounts


88 Piece Stainless Steel Screw Kit

34 Precision Cut Carbon Fiber Parts

Built-In Flight Control Roll Cage

45mm/44.5mm/30.5mm Flight Control Mount Hole Spacing

Frame Size: 318mm

Frame Wieght: 162grams With SS Screws and Aluminum Spacers: 162 grams

Can be built in + or X Flight Configurations

This is a Super Rigid Modular Construction Air Frame Design!


Build Specs are Below:

1- Karbonic-X CF X4/8 Air Frame

1-Copter Control F.C.

4-Turnigy Plush 10amp Speed Controllers

4-AddictiveRC Custom Wound Cobra 1088Kv BL Motors (Weight 21.9grams 3mm Shaft Size)

8-pcs 20awg Silicone Wires for Power Harness with Male Deans Connector

1- Spektrum AR6115 6CH DSMX 2.4 ghz Microlite Receiver

1-JR 9503 2.4ghz Transmitter

4- LaHeli 7inch Bolt on Props (nice for indoor flight) or Gaui 8 inch props with Prop adaptors for more thrust 

1-Hyperion 1,100mah 35C Li-Po Battery with Female Deans Connector

I will be Custom Building Karbonic-X RTF's with Copter Control for Our Customers later this year.

More Build Photos and Tuning Settings coming Soon.

Copter Control and Custom BL Motors Installed


Below Pictured with 8 inch Props:

Below Pictured with 7 inch Props:

All Set For Night Flying Shown Below:


Below are Tuning Values for Aggressive Flying use at your Own Risk!

Here is a Short Video After the Build was Complete.(big grin)

  • No labels

Powered by Atlassian - Copyright © 2012 OpenPilot Foundation