Big thanks to the coreteam making this possible and to the great community
Welcome on my little Wiki page here i`ll share my setups with my CopterControl and more 
1. Warthoxframe Quad in X-mode (cheap and flys perfect like a dream)
Description | Info |
|---|---|
Tx | |
Rx | HK 2,4 Ghz 6 CH (because its smaller than Turnigy) |
ESC | |
Motor | |
Props | |
Spinner | |
Centerplate | |
Lipo | |
Alu rigs | self cut 10x10mm and 20cm long |
LED | |
Cameramount |
all together less than 750g (Gopro onboard was around 1150g)
latest settings: 
2. Prototypframe in X-mode (SOLD )
Description | Info |
|---|---|
Tx | |
Rx | HK 2,4 Ghz 6 CH (because its smaller than Turnigy) |
ESC | |
Motor | |
Props | |
Spinner | |
Lipo |
Frame Layout |
|---|
CopterControl-Settings |
|---|
all together less than 800g
3. Warthoxframe Quad in X-mode with 11" Props and "big" motors(SOLD)
Description | Info |
|---|---|
Tx | |
Rx | HK 2,4 Ghz 6 CH (because its smaller than Turnigy) |
ESC | |
Motor | |
Props | |
Spinner | |
Centerplate | |
Lipo | |
Alu rigs | self cut 10x10mm and 23cm long |
LED |
weights 900g with Lipo
4. Spiderquad prototype (FPV project)
feel free to download the Layout here:
follow actionplus`s building log here
modified layout files MSQ by actionplus
follow Andre´s building thread here
follow my building thread over here
Description | Info |
|---|---|
Tx | Turnigy er9x Frsky |
Rx | |
ESC | RapidESC 30A |
Motor | T-Motor MT2216 900KV |
Props | |
Lipo | |
Alu arms | self cut alusquare 10x10mm |
5. Iconic-X FPV frame by Quad Addict
(click on picture to enlarge)
Description | Info |
|---|---|
Motor | |
Prop Drive | |
ESC | Hobby King 30A ESC 3A UBEC (UK Warehouse) flashed with WII software |
Props | Graupner 8" |
Wheel Nuts | |
Lipo | Turnigy 2200 mAh 3s 30c Lipo Pack (for the FPV video i used 3000 mAh 3s) |
Power board |
Weight inculding Lipo/GoPro/ FPV gear 1280g.
settings from the frist FPV maiden:
FPV setup 5.8 Ghz
Description | Info |
|---|---|
Goggles | |
Video Rx | |
Video Tx | ImmersionRC 5,8Ghz |
Antenna 1 | Circular Polarized spiroNet Antenna |
Video cable | |
RC-USB |
---------------------------------
older setup that didn't work HK took 4 month for support... so i decided to go with a different setup
this is my first FPV setup. You will find very useful information about FPV here <-click
| Description | Info/link |
|---|---|
| Cloverleaf antennas | hopefully for more range and better video signal |
Turnigy 9x Softwareupdate to er9x
Turnigy 9x with er9x firmware mixer settings:
CH1__100% RUD
CH2__100% ELE
CH3__100% THR
CH4__100% AIL
CH5__0% MAX ID0 (3 way flightmode switch)
______50% MAX ID1
______100% MAX ID2
CH6__100% P1 (accessory switch 0, knob/pot) for tuning
CH7__100% P2 (accessory switch 1, knob/pot) for tuning
CH8__100% P3 (accessory switch 2, knob/pot) for tuning
Description | Info |
|---|---|
Tx | |
Light | blue backlight i would recommend the white |
Module | Dragonlink |
Lipo | Turnigy 1300mAh 2S 20C Lipo Pack (Suit 1/18t |
Software |
How to - Video tutorials
more info here